2017年四川九寨沟M_S7.0强震的余震重定位及主震震源机制反演          下载免费PDF全文

梁姗姗  雷建设  徐志国  徐锡伟  邹立晔  刘敬光  陈宏峰 《地球物理学报》2018,61(5):2163-2175

本文采用双差定位法对2017年8月8日至10月31日期间四川九寨沟M_S7.0主震及5200个余震序列进行相对定位，得到4036个重定位地震事件.采用中国区域地震台网观测到的宽频带垂直分向波形数据和W震相反演方法，得到了主震震源机制解.重定位结果显示，余震序列分别沿NNW和SSE两个方向扩展，展布长度约58 km，且这些余震主要集中在22 km深度之上.余震分布的另一个重要特点是具有分区特性，即在主震NNW方向约5 km处存在明显的西北和东南两区余震活动分界线；西北区的余震由深至浅具有较好连续性，而东南区却在约10 km深度处存在不连续性.余震分布的这种分区特征，说明九寨沟地震震源区的地壳结构存在强烈的不均匀性.余震分布与主震破裂特征的一致性，证实了我们定位结果的可靠性.主震的震源机制解展示出节面Ⅰ的走向/倾角/滑动角分别为246°/83.7°/-177°，而节面Ⅱ的走向/倾角/滑动角为155.7°/87.1°/-6.3°，最佳质心深度为15.5 km，矩震级M_W为6.5.根据余震分布较为垂直和主震震源机制解两节面的倾角均在80°以上，并结合野外地质调查结果，推测此次九寨沟地震为与节面Ⅱ参数相近的一次高角度的左旋走滑型事件.  相似文献   

2008年10月西藏当雄M_W6.3地震震后形变提取与余滑反演          下载免费PDF全文

洪顺英  董彦芳  孟国杰  张奎  陈立泽 《地球物理学报》2018,61(12):4827-4837

2008年10月6日西藏当雄发生M_W6.3地震.本文利用震后2008年10月26日至2010年8月22日的16期ENVISAT ASAR数据，通过小基线集干涉测量、误差校正与MInTS（Multiscale InSAR Time Series）技术提取高精度的震后形变场，利用SDM（Steepest Descent Method）方法反演断层震后余滑演化过程，并分析震后余滑与同震滑动的关系.结果表明：当雄M_W6.3地震的近场震后形变场主要位于断层西侧，在时间演化上具有明显的对数函数衰减规律；震后余滑主要集中于断层中南段深0~15 km区间，最大的余滑量约0.07 m，位于断层深约9.28 km处，滑动角约-103°；震后余滑引起的地震矩能量M₀与矩震级M_W在时间演化上具有指数函数递增规律；当剪切模量μ=32 GPa，震后665天余滑释放的地震矩能量约为1.92×10¹⁷N·m，约占同震滑动释放地震矩的4.8%，相当于矩震级M_W5.46；虽然震后余滑已经延伸到断层浅部0~5 km区间，但由于余滑量相对较小，没有改变同震滑动在断层浅部区域的滑动亏损现象，这可能是2010年11月30日该区域又发生M_W5.3级余震的主要原因之一.  相似文献   

印度尼西亚北苏拉威西红树林生态系统碳库研究     

陈顺洋  陈彬  SASTROSUWONDO Pramudji  DHARMAWAN I Wayan Ek  欧丹云  尹希杰  俞炜炜  陈光程 《海洋学报(英文版)》2018,37(12):85-91

近年来的研究指出红树林在海岸带碳固定和碳储存方面发挥着重要的作用。尽管印度尼西亚的红树林面积在全球占很大的比重，对于该地区红树林的有机碳储量和土壤有机碳来源的认识仍有限。本研究调查了印度尼西亚北苏拉威西海洋型的Wori红树林中生态系统有机碳储量及其空间分布特征，以及土壤有机碳的来源，以期加深该地区红树林“蓝碳”功能的认识。研究结果显示，Wori红树林0-50cm深度土壤中有机碳储量为15.4 kg/m²，占生态系统碳储量的主要部分（65%）。红树植物生物量和生态系统碳储量分别为8.3 kg/m²和23.7 kg/m²。土壤有机碳储量在不同离岸距离的采样站位中未表现出显著的空间分布差异，而生物量碳储量则在外滩最高。¹³C稳定同位素分析结果表明红树林土壤中蓄积的有机碳主要来源于红树林有机质，而潮水中的悬浮有机质和红树林外缘的海草并不构成红树林土壤有机碳的重要来源，它们的贡献者都低于20%。研究结果进一步证实了热带地区海洋型红树林湿地在碳储存以及红树植物对碳固定方面的重要性。  相似文献   

印度尼西亚北苏拉威西蓝碧海峡浮游动物种类组成及分布   总被引：1，自引：0，他引：1  

王彦国  陈小银  邢炳鹏  孙柔鑫  FITRIA Nurul  项鹏  王春光  林茂 《海洋学报(英文版)》2018,37(12):35-44

Based on oceanographic survey data in June 2012 in the Lembeh Strait, the zooplankton ecological characteristics such as species composition, individual abundance, dominant species and distribution were analyzed. The results showed that 183 species(including 4 sp.) had been recognized, most of them belonged to copepoda.Cnidaria followed with 43 species(including 1 sp.) were identified. The average abundance of zooplankton was(150.47±58.91) ind./m~3. As to the horizontal distribution, the abundance of the zooplankton was higher in the southern waters than in the northern waters. The dominant species in the study area were Lensia subtiloides,Sagitta enflata, Lucifer intermedius, Oikopleura rufescens, Diphyes chamissoni, Creseis acicula, Subeucalanus subcrassus, Temora discaudata, Aglaura hemistoma, Doliolum denticulatum, Canthocalanus pauper, Oikopleura longicauda and Nanomia bijuga. Zooplankton biodiversity indexes were higher in study area than previous study in the other regions. The findings from this study provide important baseline information for future research and monitoring programs.  相似文献   

海洋功能区划与海洋生态红线关系探讨          下载免费PDF全文

高月鑫  曾江宁  黄伟  陈全震  寿鹿  徐晓群 《海洋开发与管理》2018,35(1):33-39

海洋生态红线制度是我国"五位一体"文明建设的具体要求。为进一步在自然科学与人文科学的联结点上探求深入开展生态红线工作的可能性,文章对比了实施多年的海洋功能区划与历史新阶段提出的海洋生态保护红线的概念和内涵,剖析了两者之间的区别与联系,指出海洋功能区划与海洋生态红线区划在法律地位和管控制度等方面具有一致性,在划分目标、空间管理及划分方法上具有差异性,海洋功能区划以"使用"为主,海洋生态红线以"保护"引领。在此基础上,建议未来海洋生态红线工作的开展可从海洋功能区划借鉴经验,建立完善的管控评估制度,确立生态保护红线的优先地位,处理好海洋功能区划与海洋生态红线区划的关系。同时,海洋生态红线区划应以维持海洋生态系统结构稳定和提高海洋生态系统服务功能为目标,将区域资源环境承载力评估作为一项参考指标,限制低承载区的开发利用,保证海洋生态环境健康可持续发展。  相似文献   

3D P-WAVE VELOCITY STRUCTURE AT THE NORTHEASTERN MARGIN OF ORDOS BLOCK     

HAN Xiao-ming  Liu Fang  ZHANG Fan  CHEN Li-feng  LI Juan  LI Shuan-hu  YANG Hong-ying 《地震地质》2018,40(1):215-231

Using the 7 100 absolute first arrivals of P waves and 91 513 relative P arrival times of 726 events at the northeastern margin of the Ordos block since 2009, the 3D fine structure of P wave velocity within the depth of 15km in the crust was inverted by the double difference seismic tomography method. The results show that there exist obvious high-speed continuous bodies in the northwest of the study area, and their lateral areas increase gradually with depth, while the velocity of east and south is relatively low. The velocity inhomogeneity exists and differs at different depths. The lateral differences of velocity are related to seismicity and faults. The 5~15km depth profile shows that earthquakes tend to occur in the area with relatively high velocity or high speed transition zones, which to some extent reflects the fragility of regional crustal media and the strong differential movement of faults in vertical and horizontal directions where the crust body is easy to absorb and store strain energy and generate major earthquakes. A "Y"-shape low-velocity channel is present in the lower crust around Liangcheng, corresponding to the NW-trending Heilaoyao-Shahukou fault set, which may reveal the migration path of the Late Tertiary-Quaternary basalt eruption. The Helingeer M6.2 earthquake in 1976 was related to the formation of the locking section of the thermal welding in this area. The three-dimensional fine structure of P wave velocity presented in this paper provides intuitive seismological evidence for physical and chemical properties of crustal media and the deep tectonic environment of earthquake preparation.  相似文献   

A SYSTEM OF CAPACITIVE HIGH-VOLTAGE PULSE RECHARGE/DISCHARGE AND ITS IMPLICATION ON EXPERIMENTALLY TRIGGERED EARTHQUAKE     

ZHANG Zhi-he  GUO Yan-shuang  CHEN Shun-yun 《地震地质》2018,40(6):1417-1426

An external small disturbance may trigger seismic events when the fault is in a critical state. The problems related with earthquakes triggered by the dynamic stress such as blasting loads, impact loads, volcanic eruptions and strong earthquakes, have usually drawn wide concerns in earthquake science, and the corresponding research contents are quite extensive, including earthquake triggering mechanisms, triggering earthquake uncertainty, aftershock triggering, and so on. Among them, experimental research is an important way to understand the stress triggering conditions and physical mechanisms, such as the influence of load disturbance on fault friction traits, the influence of periodic disturbance of tidal stress on fault instability, etc., all of which can be gained through experimental investigations. Among them, "how to trigger" is a basic scientific problem to increase the understanding of earthquake prediction theory, thus receiving more attention. There are also some studies that focus on "what happened after the trigger", that is, the sliding instability generated by the triggering method, and then the evolution characteristics of the sliding instability process. The well-known experimental study of the super-shear rupture process is conducted by using the electric explosion method to trigger the fault instability, and the high-speed camera records the super-shear rupture during the fault instability. This means that when the trigger source is controllable, it is possible to generate different types of instability processes, and then to explore which earthquakes will be triggered at different time and space positions under different stress states by means of active triggering. The study of stability analysis and instability process has important scientific significance.A stable system of capacitive high-voltage pulse discharge and recharge is one of basic techniques for studying the triggered earthquakes in laboratory. Based on the wire electric explosion method, this paper develops a controllable trigger experiment system. By designing a new capacitive high-voltage pulse charge and discharge system, while considering the actual needs of monitoring and system timing, multiple functions are integrated into one system. Functionally, in addition to realizing the dynamic loading and unloading function of the wire electric explosion method, the discharge process can be monitored, and the triggering, synchronization and timing signal output is performed with other observation systems, thus realizing the whole process monitoring of the dynamic disturbance action. After testing, the following functions are achieved:1)The voltage and current of the high-voltage charging power supply system can be automatically adjusted, and the system can be shut off after charging; 2)Control modes include manual and remote controls. These two modes can control the recharge, release and pulse discharge of the high voltage capacitor; 3)The system can produce multi-channel synchronous output, which satisfy multiple systems working together. In particular, the remote sensing method greatly improves the experimental maneuverability and security; 4)The system has multiple sets of gas discharge tube to trigger discharge, with a wide range of discharge voltage of 500~5 000V; 5)Roche coil resistance integral current detection can meet the transient resistance, large current detection. Test results indicate that this system has good repeatability and stability with the same discharge energy and discharge energy regulator, which is conducive to carry out single channel trigger of high-pressure discharge experiment. In short, the new charging and discharging system can meet the requirements of experimental study of triggering earthquake. In addition, this system can be used to generate the stress disturbance under certain static and dynamic conditions, and then judge whether this kind of mechanical conditions in active fault systems is currently stable.In short, a controllable single-shot discharge system is developed by a capacitive high-voltage pulse discharge system, which provides a good technical basis for experimental research on triggering earthquakes. In addition, the new system also has application significance:1)multiple triggering output can simultaneously start multiple systems and improve the efficiency of observation. Fault instability is a characteristic of transient response, so, its observation requires high-speed acquisition equipment, which is difficult to control on observation; the trigger system is controllable, with active synchronization observation using physical parameters; 2)stress disturbance can be triggered under static and dynamic loads to detect the safety and stability of the fault system with active trigger.  相似文献   

益气养阴方治疗气阴两虚型慢性功能性便秘40例临床观察     

周峰  张旗  张永安 《应用海洋学学报》2018,34(5):5-7

目的：观察益气养阴方治疗气阴两虚型慢性功能性便秘的临床疗效。方法：将气阴两虚型慢性功能性便秘患者80例随机分为治疗组与对照组各40例。治疗组采用益气养阴方治疗，对照组采用枸橼酸莫沙必利分散片治疗，比较2组患者临床疗效及临床症状积分变化情况。结果：总有效率治疗组为90.0%，对照组为75.0%，2组比较，差异有统计学意义（P<0.05）；2组临床症状积分治疗前后组内比较及治疗后组间比较，差异均有统计学意义（P<0.05）。结论：益气养阴方治疗气阴两虚型慢性功能性便秘有较好的临床疗效。  相似文献   

酶解法辅助提取布渣叶总黄酮的工艺优选          下载免费PDF全文

陈雪婷  徐文杰  李智勇 《应用海洋学学报》2018,34(10):176-179

目的：优选酶解法辅助提取布渣叶总黄酮的工艺条件。方法：以总黄酮提取率为指标，采用单因素试验、正交试验法，分别考察酶种类、酶用量、pH值、酶解时间及乙醇浓度对提取工艺的影响。结果：最佳工艺条件为复合酶（纤维素酶∶果胶酶=1∶1）用量1%，乙醇浓度60%，酶解1h，总黄酮提取率为20.90%，较未经酶解法提高了4.85%。结论：优选的工艺简单高效，为布渣叶总黄酮的开发利用提供了实验依据。  相似文献   

基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究   总被引：1，自引：1，他引：0  

陈文鹏  刘胤超  陈立卫 《海洋工程》2018,36(2):119-126

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。  相似文献